HARD WOOD CHIPS EUCALYPTUS

Wood Chips Eucalyptus Brazil Biomass and Partners are ideal for the cellulose and MDF. Our product is of high quality. Quality management. Cost-efficient production of high quality fuel according to the requirements of the boiler producers. We have large quantity of biomass used for energy industry.

Hard Wood Chips Paper and Pulp Eucalyptus

Moisture Content 18/24 % max
Ash Content 0,3% or 0,7%
Basic Density 0,502 g/cm3
Bulk Density 200-450 kg/m3
Calorific Power 4.927 Kcal/Kg

CHEMICAL COMPOSITION OF WOOD
Pulp Cellulose 60,9% - Holo Cellulose 69,1% - Pulp yield and Kappa Provenance Pulp yield %55.6 (4.0) -Kappa nº17.5 (0.9) Pulp yield %58.5 (0.6)-Kappa nº15.8 (0.6) Pulp yield %58.9 (0.8)-Kappa nº15.3 (0.9) Pulp yield %60.9 (0.3)-Kappa nº15.4 (1.1)

Lignin (TAPPI T222) 27.0% - Klason 21,5% - Soluble 5.5 (1.1)
Carbohydrates 63,5% - Glucan 49,5% - Xylan 14.8 (2.2)

Hemicellulose 20%
Extractives (TAPPI T204) 3,9% - Dichloromethane 0,2% - Ethanol 2,0% - Water 1.7 (0.2)
Mineral Comp 0,5%
PH 5,7%
Polvoses 16,3%
Volatile 13,0%
Volatile Matter 70,55%
Bark More than 2,0%
Sand Maximum 0,1%
Fixed Carbon 12,06%
Max. Chip Size 5,0%
Sizing 0,3 cm – 4,5 cm
Overs 5,0%
Fines 5,0%
Chemical Hydrogen (ASTM D 5373)5,62% - Oxygen 39,42% - Nitrogen (ASTM D 5373) 0,23% - Sulfur Less (ASTM D 4239) 0,08% - Chlorine Less (ASTM D 3761) 499 mg/kg - Carbon (ASTM D 5373) 51,32%

RESULTS OF ANALYSIS LBF/UFPR

BRAZIL BIOMASS AND RENEWABLE ENERGY SA
IMPLEMENTATION: LABORATORY OF BIOMASS ENERGY (EBL) SECTOR OF AGRICULTURAL SCIENCES FEDERAL UNIVERSITY OF PARANA BRAZIL PROF. DR. DIMAS AGOSTINHO DA SILVA
Curitiba, July 2009
OBJECTIVE: Analyze biomass to produce thermal energy. The parameters determined were moisture, chemical composition (the content of volatiles, fixed carbon and ash) and calorific value.
RAW : Eucalyptus chips ORIGIN: Brazil METHODOLOGY: •Moisture: As the standard of ABNT NBR 7993.
• Chemical Composition (volatiles, fixed carbon and ash): As the ABNT standard NBR 8112
• Calorific value (upper and lower): As the ABNT standard NBR 8633 RESULTS TABLE - RESULTS FOR AVERAGE PARAMETERS ASSESSED
Moisture Dry Basis 18,44%
Volatiles 80,39%
Fixed Carbon 19,10%
Ash Content 0,61%
Gross Calorific Value Dry Kcal/Kg 4901
Lower Calorific Value Dry Kcal/Kg 4577
Calorific Useful Wet* Kcal/Kg 3780

Our Premium Wood Chips Eucalyptus are ideal for the manufacture of particleboard, MDF and paper pulp. We supply hardwood and softwood chips, according to our customers’ requirements. All our wood chips are derived from sustainable harvesting of forest stock. Chipping and debarking is done in the forest or at the mill. We can meet any sizing and quality specification. In order to ensure the highest quality, our wood chips are regularly tested according to ASTM standards for moisture, sizing, bark content, rot, and ash content. Homogeneity of feedstock and consistency of our end product are our highest priorities. With an integrated transportation network of truck, rail and ocean vessel, we are able to deliver our premium wood chips reliably across Brazil and worldwide.Much of the raw materials Brazil Biomass Wood Chips SC we use for biomass from certified forests.

We have large quantity of eucalyptus wood chip used for paper industry.
Clean woodchips. Private port for private use. Certified by ISPS.
Rate of load 8.400 ton/day. Phytosanitary Certificate. Fumigation Certificate.
Origin Certificate . Quality Control Certificate Alex Stewart International. Surveyor Certificate.
Alex Stewart the largest international company with activities relating to the inspection and analysis.
Inspection of Wood Chips Brazil. Supervision of loading, 24hrs per day.

The advantages of Brazil Biomass Wood Chip Eucalyptus are:
• it is cheap, often as cheap as logs and now cheaper than mains gas;
• it is a standardised product with Europe wide quality standards in place;
• fully automated, highly efficient boiler systems are available;
• it can be made from a wide range of raw materials, often sourced locally.

Quantity Hard Wood Chips Eucalyptus Santa Catarina: 17,000 TM
PRICE HARD WOODCHIPS FOB PORT ITAJAI/IMBITUBA SC US118,00 BDMT